An Ethernet cable to connect each computer to the network.

Thanks to it, your laptop, smartphone, smart TV, and other devices can connect to your.

need help configuring Actiontec MI424-WR router as a bridge so that the public address is passed to my existinbg firewall. It's important that you plug the devices into the proper designated ports because you want the modem. Other users have documented these steps in My Fios router was already in bridge mode. I will make a quick guide on how to foward ports with the Actiontec MI424WR wireless router, but for now, here's the default user name and password to log into the router. An Ethernet cable to connect the router to the FiOS wall connection. Connect the WAN of the fios router to the switch. 1, Routing mode is somewhere in the advanced settings. To enable Router mode, select the Router radio. Step 10: On the Warning screen, click Yes. Turn on the Set-Top Box and wait a few minutes while the Interactive Media Guide updates. This document describes how to configure a Verizon FiOS G1100 to act in bridge mode. ' Once the modem is in bridge mode, the banner in the upper-right corner will display that it is bridged. You may want to power cycle the set top boxes and then “refresh” the DVR from the menu. Home Set the Address here to the WAN MAC of your selected router that will be connected to the Actiontec to avoid conflicts. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ for the IP address the Orbi router gets from the modem. Here is a excerpt from the ActionTec site: If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the. If yes then your existing router would have to be in bridge mode. How to set verizon fios mi424wr router to bridge mode.

Dslreports speed test